PackTech.
Products Round Drum Liners FIBC and Jumbo Bags Bulk Bag and FIBC Liners Liquid Flexi Bags and Bladder Tanks Machine Covers and Protective Packaging Pallet Covers and Pallet Wraps Hazardous Waste Containment and Spill Control All products By role Plant Head and Operations Quality Head Safety and EHS Head Purchase and Supply Chain Company Industries Materials FAQ About Contact
Specify your requirement

The full range

41 products across 7 categories.

Not the limit of what the plant can make. If a size is not listed, it can almost certainly still be built.

01 / 7

Round Drum Liners

Any internal diameter from 6 inches to 100 inches

Category overview
Flagship Round drum liner filled with green olives, its black screw-cap dispensing spout fitted at the top

Round Drum Liner with Integrated Dispensing Spout

Turns a throwaway drum into a returnable asset

1.1
6" – 100" Three folded round drum liners laid flat and labelled 6 inch, 22 inch and 45 inch diameter

Round Drum Liner — Any Diameter from 6 to 100 Inches

Made to your drum, not to whatever size the supplier already makes

1.2
Black conductive drum liner in a steel drum with an earthing clamp attached to the bonding cable

Conductive Round Drum Liner

Static control that fits your existing earthing procedure

1.3
Aluminium barrier drum liner, filled and standing on a pallet

Aluminium Barrier Drum Liner

Almost total barrier against moisture, oxygen and gas

1.4
Clear PVC drum liner cuffed over the rim of a fibre drum

PVC Round Drum Liner

For product groups that polyethylene cannot hold

1.5

02 / 7

FIBC and Jumbo Bags

Woven polypropylene bulk containers built to your load

Category overview
FIBC with air-releasing vent panels lifted on a crane hook at a loading bay

Single and Double Loop FIBC Bag with Air Releasing Vent

Faster filling without touching the filling machine

2.1
Type C conductive FIBC suspended on a crane with an earth lead clipped to its bonding point

Conductive Type C Jumbo Bag

Groundable FIBC for a controlled filling station

2.2
Type D antistatic FIBC lifted in a warehouse

Conductive Type D Jumbo Bag

Antistatic protection with no earthing step to forget

2.3
Net baffle jumbo bag holding a square shape on a pallet

Net Baffle Jumbo Bag

Costs more per piece and less per tonne delivered

2.4

03 / 7

Bulk Bag and FIBC Liners

The liner decides the barrier, not the bag

Category overview
Folded multilayer polyethylene liner

Multilayer Plastic Liner for Non-Hazardous Products

More strength from less material

3.1
Clear PVC liner fitted inside an open bulk bag

PVC Bulk Bag Liner

Specified on compatibility, not on price

3.2
Bulk bag with an EVOH barrier liner, filled and closed at the spout

EVOH Barrier Liner

Oxygen barrier with the handling behaviour of PE

3.3
Corner of a box-type polyethylene liner, welded to hold a square shape

PE Box Type Liner

Two problems solved by one change

3.4
Baffle liner holding a square shape when filled

Baffle and Gambo Liner

Shape control and barrier performance in the same liner

3.5
Black conductive liner fitted inside a bulk bag

Conductive Liner

The liner sits between the product and the bag

3.6
Conductive aluminium liner in a bulk bag with its dissipative layer visible at the neck

Conductive Aluminium Liner

One liner replaces a double-lining arrangement

3.7
Five-layer aluminium laminate liner standing filled on a factory floor

Aluminium 5-Layer and 6-Layer Liner

Every layer specified for a job we can explain

3.8
Aluminium laminated liner formed as a flat-bottomed sack

Multilayer Aluminium Laminated Liner for Powders

Caking is not a fact of life. It is moisture coming through the packaging.

3.9
Aluminium multilayer liner in a bulk bag, filled with fertiliser granules

Aluminium Multilayer Liner for Water-Based Fertilisers

Built for the monsoon, not for a general specification

3.10

04 / 7

Liquid Flexi Bags and Bladder Tanks

Bulk liquid without a container to clean, track or return

Category overview
Operator filling a liquid container from a bulk storage tank through a transfer hose

Liquid Flexi Bag, 1000 to 1500 Litres, with Inlet and Discharge Valves

No container to clean, track or bring back

4.1
Bolted flange fitting welded into the wall of a collapsible bladder tank

Collapsible Bladder Tank with Support Frame

Goes up in hours, comes down in hours, moves to the next site

4.2

05 / 7

Machine Covers and Protective Packaging

Built to the machine drawing, not to a standard bag size

Category overview
Flagship Machine vacuum packed in aluminium laminate with an inspection window over the control head

Aluminium Vacuum Laminate Cover

The premium product in the protective packaging range

5.1
Diesel generator sealed in a close-fitting protective cover

Generator Protective Cover

Protects the machine and the sale

5.2
Electrical control panel standing on the workshop floor before packing

Electrical Panel Packaging Cover

Humidity control treated as the design problem

5.3
Transformer bushings capped and taped against ingress before shipment

Transformer Protective Cover

Built around the bushings and radiators, where loose covers tear

5.4
Chargers, control boxes and castings sealed in individual protective bags on a packing bench

Battery Charger and Component Cover

Protection and identification in the same cover

5.5
Turbine component under a fitted cover with an opening left for the shaft

Wind Turbine and Turbine Component Cover

Specified for the storage period, not for a short transit

5.6
Screw compressor sealed in a protective cover on its skid

Screw Compressor Cover

VCI type and cover seal matched together

5.7
CNC machining centre enclosed in a clear protective cover

CNC Machine and Large Machinery Cover

Every cover fabricated from the machine drawing

5.8
Component sealed in a close-fitting shrink cover

Shrink Wrap Cover for Machines and Round Components

No loose folds where water can collect

5.9
Machine sealed in a blue VCI cover on its pallet with a do-not-open label

VCI Machine Cover

Protects surfaces the film never touches

5.10

06 / 7

Pallet Covers and Pallet Wraps

The most common damage in the supply chain, and the cheapest to prevent

Category overview
Pallet of cartons under a clear LDPE hood

LDPE Pallet Cover and Pallet Hood

One piece, no joins, made to your stack height

6.1
Operator shrinking a hood onto a pallet of cartons with a gas gun

Pallet Shrink Hood

Makes the stack behave as one block

6.2
Woven laminated covers over palletised loads standing in an outdoor yard

Woven Laminated Pallet Cover

A one-time purchase that lasts for years

6.3
Hook-and-loop closure on a reusable equipment cover

PVC Pallet Cover and Reusable Equipment Cover

Built for daily use over years, not for one journey

6.4
Stillage of steel components under a blue VCI cover

VCI Pallet Cover

A full pallet of metal parts protected in one operation

6.5
Clear top sheet laid over a pallet of cartons

Pallet Top Sheet and Pallet Liner

Closes the one gap stretch wrap always leaves

6.6
Inflator nozzle in the valve of a kraft dunnage bag

Dunnage Air Bag for Container and Truck Loads

Movement in transit is the largest cause of damage inside a sealed container

6.7

07 / 7

Hazardous Waste Containment and Spill Control

Built to your method statement, not from a catalogue

Category overview
Sealed polythene containment enclosure erected inside a stripped building

Asbestos Demolition Containment Chamber

Built to your method statement

7.1
Sealed containment unit labelled for hazardous waste on a site

Nuclear and Hazardous Waste Site Enclosure

Built entirely to your issued engineering specification

7.2
Yellow flexible bund holding drums and a generator on a hardstanding

Spill Containment Bund and Drip Tray

Walls stand on their own, so it actually gets used

7.3

Send us the problem

Send the drawing, the drum, or the data sheet.

Every product we make is built to order, so the conversation starts with your specification rather than with our price list. Sample liners and trial covers are supplied for fitment before bulk production begins.

Specify your requirement Talk to the technical team