LDPE Pallet Cover and Pallet Hood
One piece, no joins, made to your stack height
Makes the stack behave as one block
Shrunk on, so the load is held as one.
Loads shift, lean and collapse on open transport and through multiple transfers. The percentage of pallets arriving with a leaning stack is usually higher than anyone wants to admit.
A heat-shrinkable hood that is pulled over the loaded pallet and then shrunk with heat so it grips the load tightly. The result is a sealed, weather-tight unit that holds the stack together and behaves like a single solid block during handling.
This is used where the load must stay stable through rough handling, multiple transfers or open transport, and where a loose cover would flap or tear away.
The film has to shrink enough to grip firmly without splitting at the corners of the load. We work out the shrink ratio and thickness against your load shape and weight instead of supplying one general grade.
We will run a trial on your worst route, where the improvement will be most visible.
Every one of these can be changed for your application, and a sample is supplied for trial fitment before bulk production.
Commonly specified with
These are usually part of the same conversation.
One piece, no joins, made to your stack height
No loose folds where water can collect
Movement in transit is the largest cause of damage inside a sealed container
From the blog
A dunnage air bag is an inflatable bag placed in the gap between pallets, or between the load and the container wall, then inflated so it fills the void and locks the…
Stretch wrap holds a pallet together but leaves the top open, which is where dust and water land first. A pallet hood or top sheet closes the top. A shrink hood seals…
Enquiries
Send the drawing, the drum dimensions or the product data sheet. Every product is built to order, so the conversation starts with your specification, not a price list. Sample liners and trial covers are supplied for fitment before bulk production begins.