PackTech.

Shipping and logistics

Pallet Covers vs Stretch Wrap vs Shrink Hoods: Which Protects a Pallet Best?

Stretch wrap, pallet hoods, shrink hoods, reusable covers, VCI covers and top sheets compared — what each protects and when to use it.

Key takeaways

  • Stretch wrap stabilises the sides but leaves the top face of every pallet exposed.
  • A top sheet under the stretch wrap is the cheapest fix for wet or dusty top cartons.
  • A shrink hood makes the load a single sealed block — best for open transport and outdoor yards.
  • Reusable woven laminated and PVC covers pay back where pallets are covered and uncovered repeatedly.
  • A VCI pallet cover protects a whole pallet of metal parts in one operation, with nothing to clean off.

Where pallets get damaged

A pallet is where a shipment is most exposed. The goods have left their individual cartons behind, they are stacked in the open, and they will be handled several times by people who did not pack them. Damage on the pallet is the most common damage in the supply chain — and the cheapest to prevent.

The protection a pallet needs depends on three things: what threatens it (water, dust, UV, load collapse, corrosion), how long it is exposed, and whether it is covered once or repeatedly.

The options compared

Option Protects Leaves exposed Reuse Best for
Stretch wrap only Sides; holds load together The top face Single use Indoor, short-distance, dry
Stretch wrap + top sheet Sides and top Little Single use Any stretch-wrapping line, cheaply
LDPE pallet hood Top and four sides in one piece Base Single use Warehousing, transport, export
Shrink hood Whole load, sealed and held tight Base Single use Open transport, outdoor storage, unstable loads
Woven laminated cover Top and sides, weatherproof, tear resistant — Many uses Long outdoor storage, picking and re-covering
PVC reusable cover Top and sides, heavy duty — Daily use for years In-plant pallets, trolleys, equipment
VCI pallet cover Corrosion of metal parts, plus cover — Single use Machined parts, castings, fasteners

Stretch wrap leaves the top open

Stretch wrap is excellent at one job — holding a stack together. Wound around the sides, it leaves the top face of the pallet open, and that is exactly where dust settles and water lands first. When the top layer of cartons arrives dusty or water-stained, this is usually why.

The cheapest fix is a top sheet: a sheet of LDPE laid over the stack before it is wrapped. A pallet liner laid on the deck under the load does the same for the bottom layer, stopping moisture, splinters and nail heads from the pallet reaching the goods.

Pallet hoods: top and sides in one piece

An LDPE pallet hood is pulled down over the loaded pallet like a bag. It covers the top and all four sides with no joins for water or dust to get through. It must be made to the pallet size and stack height — a standard size is either a struggle to pull down or so loose it flaps and tears.

Shrink hoods: one solid block

A shrink hood is pulled over the load and shrunk with heat so it grips the stack tightly. The result is a sealed, weather-tight unit that behaves like one solid block in handling. When a load collapses in transit the whole pallet is a loss, not just one carton, so shrink hoods are used for export, open transport, outdoor storage, building materials and heavy or unstable loads. The film must shrink enough to grip without splitting at the corners, so shrink ratio and thickness are worked out against the load.

Reusable covers: buy once

For pallets that are stored outdoors for long periods, or opened for picking and re-covered, a single-use cover is bought again and again. A woven laminated cover has a tear strength film cannot reach and is weatherproof; a PVC-coated fabric cover is built for daily use over years. The fittings — eyelets, tie-downs, closures, handles — decide whether a reusable cover actually gets reused. A cover that takes two people to fit will be left off.

VCI pallet covers: corrosion in one step

Wrapping metal parts one by one is slow, and oiling them means degreasing them later. A VCI pallet cover protects a whole pallet of machined parts, castings or fasteners in one operation: the inhibitor vapour fills the space under the cover and protects every metal surface inside, with nothing to clean off. See what is VCI packaging.

Inside the container

However well each pallet is covered, pallets that can move inside a container still arrive damaged. Dunnage air bags fill the gaps between them.

All of these are made to your pallet footprint and stack height rather than to a standard size. Send the pallet dimensions, stack height, storage conditions and how the pallets are handled.

Frequently asked questions

Is stretch wrap waterproof?

Stretch wrap is water resistant on the sides it covers, but a pallet wrapped only with stretch wrap is open at the top, and water and dust land there first. For outdoor storage, open transport or a wet climate, add a top sheet under the wrap, use a pallet hood, or use a shrink hood that seals the whole load.

What is the difference between a shrink hood and a pallet hood?

A pallet hood is a pre-made bag pulled down over the load; it covers the top and four sides but sits loosely. A shrink hood is pulled over the load and then heated so it shrinks tight, gripping the load and holding it together as one solid, weather-tight block. The shrink hood is stronger and more secure; the plain hood is quicker and cheaper.

When is a reusable pallet cover worth it?

When the same pallets are covered and uncovered repeatedly, stored outdoors for long periods, or opened for picking and re-covered. A woven laminated or PVC-coated fabric cover with eyelets, ties and closures lasts for many uses, where film covers are bought again every time and often end up as litter around the site.

Mentioned in this guide

Products

Each one is made to order, in the material your product needs.

All products
Pallet of cartons under a clear LDPE hood

LDPE Pallet Cover and Pallet Hood

One piece, no joins, made to your stack height

6.1
Operator shrinking a hood onto a pallet of cartons with a gas gun

Pallet Shrink Hood

Makes the stack behave as one block

6.2
Woven laminated covers over palletised loads standing in an outdoor yard

Woven Laminated Pallet Cover

A one-time purchase that lasts for years

6.3
Hook-and-loop closure on a reusable equipment cover

PVC Pallet Cover and Reusable Equipment Cover

Built for daily use over years, not for one journey

6.4
Stillage of steel components under a blue VCI cover

VCI Pallet Cover

A full pallet of metal parts protected in one operation

6.5
Clear top sheet laid over a pallet of cartons

Pallet Top Sheet and Pallet Liner

Closes the one gap stretch wrap always leaves

6.6

Keep reading

Related guides

All guides

Enquiries

Send us your requirement

Send the drawing, the drum dimensions or the product data sheet. Every product is built to order, so the conversation starts with your specification, not a price list. Sample liners and trial covers are supplied for fitment before bulk production begins.