# Packaging for Automotive and Component Manufacturing

> VCI pallet covers and component covers for machined parts, castings, forgings and fasteners. No oil to apply and nothing to degrease.

- Page: https://www.gipacktech.com/industries/automotive-and-component-manufacturing
- Publisher: GI PackTech — manufacturer and exporter of industrial flexible packaging, Valsad, Gujarat, India. Established 2006. ISO 9001:2015 Certified.
- Last updated: 2026-11-17

**You are paying twice: once to protect the part, and again to clean the protection off.**

Machined and unpainted metal surfaces corrode in storage, and the usual answer is oil or grease that has to be degreased before assembly. That step costs labour, solvent and time on every part.

**Typical applications:** VCI covers, VCI pallet covers, component covers

## Recommended products

- [VCI Pallet Cover](https://www.gipacktech.com/products/pallet-covers-and-pallet-wraps/vci-pallet-cover) — A full pallet of metal parts protected in one operation
- [VCI Machine Cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/vci-machine-cover) — Protects surfaces the film never touches
- [Battery Charger and Component Cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/battery-charger-and-component-cover) — Protection and identification in the same cover

## Guides

- [Pallet Covers vs Stretch Wrap vs Shrink Hoods: Which Protects a Pallet Best?](https://www.gipacktech.com/blog/pallet-covers-vs-stretch-wrap-vs-shrink-hoods) — Stretch wrap holds a pallet together but leaves the top open, which is where dust and water land first. A pallet hood or top sheet closes the top. A shrink hood seals the whole load into one weather-tight block for rough handling and outdoor storage. Woven and PVC covers are reusable for long or repeated storage, and VCI covers protect pallets of metal parts from corrosion.
- [What Is VCI Packaging? Corrosion Protection Without Oil or Grease](https://www.gipacktech.com/blog/what-is-vci-packaging) — VCI packaging is film, paper or a cover that releases a volatile corrosion inhibitor. Inside a closed enclosure the vapour spreads and settles as a very thin protective layer on every metal surface, including bores and threads the film never touches, and stops rust forming. Unlike oil or grease, there is nothing to clean off — the part is unwrapped and used.
- [Seaworthy Export Packing for Machinery: Aluminium Barrier, VCI and Desiccant](https://www.gipacktech.com/blog/seaworthy-export-packing-for-machinery) — Seaworthy packing for machinery seals the machine inside its own barrier so the moisture and salt air of a sea voyage never reach it. The standard method is an aluminium foil laminate cover built to the machine, heat sealed around it on a sealed base, with desiccant sized to the enclosed volume and transit time, VCI for bare metal, and the air drawn down by vacuum before sealing.
- [Container Rain and Cargo Sweat: Protecting Goods from Moisture on a Sea Voyage](https://www.gipacktech.com/blog/container-rain-and-cargo-sweat) — Container rain is condensation that forms on the inside walls and roof of a shipping container when the air inside cools below its dew point, then drips onto the cargo. Cargo sweat is condensation on the cargo itself when cold goods meet warm, humid air. Both are prevented by controlling moisture at the cargo — sealed barrier packaging, desiccant, VCI and the right liner.
- [Protective Covers for Generators, Transformers, Panels and Wind Turbine Components](https://www.gipacktech.com/blog/covers-for-generators-transformers-and-panels) — Generators, transformers and electrical panels fail differently from plain machinery: moisture reaches terminations, windings and electronics, and the damage is invisible until the unit is energised. They are protected by covers built to the unit's profile — around canopies, exhausts, bushings and radiators — in multilayer film or aluminium barrier, with desiccant, a humidity indicator and VCI where needed.

---

## How to enquire

Everything is made to order against the buyer's specification, so there is no price list. Send the product data sheet, the container internal dimensions or the machine drawing, and the approximate annual quantity. The reply is a specification, a quotation and a sample for trial fitment.

- Specify a requirement: https://www.gipacktech.com/specify
- Contact: Mr. Alpesh Desai, Chief Executive Officer
- Email: alpesh@gibags.net
- Phone: +91 98210 18387
- WhatsApp: https://wa.me/919821018387
- Manufacturing plant: Plot No. 608, New GIDC, Gundlav, Valsad, Gujarat 396035, India
- Office: Rajneel Bunglow, North Avenue Corner, Linking Road, Santacruz (West), Mumbai 400054, India
