# Seaworthy Export Packing for Machinery: Aluminium Barrier, VCI and Desiccant

> How machinery makers protect equipment on long sea voyages: sealed aluminium barrier covers, vacuum, desiccant and VCI, built to the drawing.

- Page: https://www.gipacktech.com/blog/seaworthy-export-packing-for-machinery
- Publisher: GI PackTech — manufacturer and exporter of industrial flexible packaging, Valsad, Gujarat, India. Established 2006. ISO 9001:2015 Certified.
- Last updated: 2026-10-30

**Topic:** Machinery and export packing · **Published:** 2026-10-30 · **Updated:** 2026-10-30 · **Written by:** GI PackTech technical team

**Written for:** Machine tool and capital equipment manufacturers (OEMs), Export packing and logistics managers, Power equipment makers, Project cargo forwarders

## Short answer

Seaworthy packing for machinery seals the machine inside its own barrier so the moisture and salt air of a sea voyage never reach it. The standard method is an aluminium foil laminate cover built to the machine, heat sealed around it on a sealed base, with desiccant sized to the enclosed volume and transit time, VCI for bare metal, and the air drawn down by vacuum before sealing.

## Key takeaways

- Transit corrosion is found at commissioning, when the engineer is on site and the customer is waiting.
- A crate keeps knocks out; only a sealed barrier keeps moisture and salt air out.
- Aluminium laminate is the barrier, desiccant dries the air inside, VCI protects bare metal, vacuum removes most of the air.
- The heat seal is where barrier packs fail, so the seal specification matters more than the film.
- Covers must be built to the general arrangement drawing — there is no standard size in machinery.

## Why export machinery corrodes

A machine leaves the assembly floor clean and accurate. Several weeks later — after a truck, a port, a sea voyage, another port and an inland journey — it is uncrated on the customer's site. In between it has been exposed to humid air, salt, temperature swings and [condensation inside the container](https://www.gipacktech.com/blog/container-rain-and-cargo-sweat).

The damage is found at commissioning: a corroded slideway, rust on a ground surface, moisture in a control cabinet. By then the manufacturer's engineer is on site, the customer is waiting, and the cost is not the repair. It is the delay, the travel, the penalty clause and the reputation. A machine tool is sold on its accuracy, and a corroded slideway cannot be polished back to it.

## A crate is not a barrier

A wooden crate or skid protects a machine from knocks and makes it liftable. It does nothing about moisture: air, and the moisture in it, passes straight through. Wood itself carries moisture into the pack. Corrosion protection has to come from a sealed barrier **around the machine**, inside the crate.

## The four parts of a seaworthy pack

| Part | Job |
| --- | --- |
| Aluminium foil laminate cover and base | Stops moisture, salt air and oxygen getting in — near-total barrier |
| Desiccant | Absorbs the moisture trapped inside at sealing, and any that permeates through the seals over the voyage |
| VCI | Protects bare metal surfaces — including ones the film never touches |
| Vacuum drawing | Removes most of the air and moisture before the final seal; pulls the cover tight |

### The barrier

An [aluminium vacuum laminate cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/aluminium-vacuum-laminate-cover) — aluminium foil laminated with nylon and polyester, in up to six layers — gives near-total protection against moisture and gas, with very little passing even at the heat seal. The cover is fabricated to the machine and sealed to a barrier base sheet, so the machine sits in a closed envelope.

### The desiccant

Desiccant is placed inside before sealing. The quantity depends on the enclosed volume, the barrier's water vapour transmission, the area of the seals, the length of the voyage and anything hygroscopic inside the pack — such as wood. Barrier packs are commonly designed to hold the air inside below about 40 per cent relative humidity, where steel corrosion is very slow. A **humidity indicator** card visible through a window lets the receiving engineer see that the pack held.

### VCI

A VCI inner layer releases a corrosion-inhibiting vapour inside the sealed cover that settles on every metal surface — bores, gear cases, threaded holes — with nothing to clean off before use. See [what is VCI packaging](https://www.gipacktech.com/blog/what-is-vci-packaging).

### Vacuum

Drawing the air out before the final seal removes most of the moisture and oxygen, holds the cover tight against the machine so it does not chafe, and makes a leak visible.

## The seal decides it

Intact aluminium foil stops almost everything. The weak points are the **heat seals** and any **punctures** — from sharp corners, lifting points or handling. That is why the seal specification, and reinforcement where forks and slings touch, matter more than the layer count. GI PackTech's seal specification is the reason it can make a total barrier claim honestly.

## Built to the machine drawing

There is no standard size in machinery. Every cover is fabricated from the **general arrangement drawing**, including projections — control panels, exhausts, spindles, conveyors. A cover that is too loose leaves slack that traps water and tears at the corners; one built to the profile seals properly. GI PackTech makes covers for:

- [CNC machines, machining centres, power presses and large machinery](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/cnc-machine-and-large-machinery-cover)
- [Screw compressors and process skids](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/screw-compressor-cover)
- [Generators, transformers and panels](https://www.gipacktech.com/blog/covers-for-generators-transformers-and-panels)
- [Wind turbine and turbine components](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/wind-turbine-component-cover)
- Round components, coils and reels, with a [shrink wrap cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/shrink-wrap-cover)

## For OEMs shipping a product line

Machinery manufacturers who ship the same models repeatedly can standardise: one cover specification per model, made from the drawing once and repeated on every order, with the manufacturer's identification printed or labelled where needed. A trial cover on one machine proves the fit before the specification is fixed.

## What to send

- The general arrangement drawing, with projections and lifting points
- Route, voyage length and expected storage before installation
- Metals exposed — steel, cast iron, copper, aluminium — for the VCI formulation
- Whether the machine is crated, skidded or containerised

Send one machine as a trial; the cover, desiccant and VCI are specified together for its voyage.

## Frequently asked questions

**What is seaworthy packing for machinery?**

Seaworthy packing protects a machine through a sea voyage and the storage either side of it. It combines mechanical protection — a skid or crate — with a sealed moisture barrier around the machine itself, usually an aluminium foil laminate cover heat sealed on a base sheet, with desiccant and VCI inside. The barrier is what stops corrosion; the crate stops knocks.

**Why vacuum pack a machine for export?**

Drawing the air out of a sealed barrier cover before the final seal removes most of the moisture and oxygen trapped inside, pulls the cover tight so it does not chafe or flap, and makes any leak obvious because the cover relaxes. Together with desiccant and VCI, it keeps a machine tool arriving after weeks at sea ready to run rather than needing to be stripped and cleaned.

**How do you protect a CNC machine for export?**

With a cover fabricated from the machine's general arrangement drawing in aluminium vacuum laminate, sealed around the machine on a barrier base, with desiccant sized to the enclosed volume and voyage, and VCI protection for slideways and bare machined surfaces. The machine is then crated or skidded for handling. GI PackTech builds the cover from the drawing.

## Products mentioned

- [Aluminium Vacuum Laminate Cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/aluminium-vacuum-laminate-cover) — The premium product in the protective packaging range
- [CNC Machine and Large Machinery Cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/cnc-machine-and-large-machinery-cover) — Every cover fabricated from the machine drawing
- [VCI Machine Cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/vci-machine-cover) — Protects surfaces the film never touches
- [Screw Compressor Cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/screw-compressor-cover) — VCI type and cover seal matched together
- [Generator Protective Cover](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/generator-protective-cover) — Protects the machine and the sale
- [Shrink Wrap Cover for Machines and Round Components](https://www.gipacktech.com/products/machine-covers-and-protective-packaging/shrink-wrap-cover) — No loose folds where water can collect

## Related guides

- [What Is VCI Packaging? Corrosion Protection Without Oil or Grease](https://www.gipacktech.com/blog/what-is-vci-packaging)
- [Protective Covers for Generators, Transformers, Panels and Wind Turbine Components](https://www.gipacktech.com/blog/covers-for-generators-transformers-and-panels)
- [Container Rain and Cargo Sweat: Protecting Goods from Moisture on a Sea Voyage](https://www.gipacktech.com/blog/container-rain-and-cargo-sweat)

---

## How to enquire

Everything is made to order against the buyer's specification, so there is no price list. Send the product data sheet, the container internal dimensions or the machine drawing, and the approximate annual quantity. The reply is a specification, a quotation and a sample for trial fitment.

- Specify a requirement: https://www.gipacktech.com/specify
- Contact: Mr. Alpesh Desai, Chief Executive Officer
- Email: alpesh@gibags.net
- Phone: +91 98210 18387
- WhatsApp: https://wa.me/919821018387
- Manufacturing plant: Plot No. 608, New GIDC, Gundlav, Valsad, Gujarat 396035, India
- Office: Rajneel Bunglow, North Avenue Corner, Linking Road, Santacruz (West), Mumbai 400054, India
