# Dunnage Air Bags: How to Secure Container and Truck Loads Without Damage

> What dunnage air bags do, how to size and place them for the gap in a container or truck, and the mistakes that make them fail.

- Page: https://www.gipacktech.com/blog/dunnage-air-bags-guide
- Publisher: GI PackTech — manufacturer and exporter of industrial flexible packaging, Valsad, Gujarat, India. Established 2006. ISO 9001:2015 Certified.
- Last updated: 2026-10-30

**Topic:** Shipping and logistics · **Published:** 2026-10-30 · **Updated:** 2026-10-30 · **Written by:** GI PackTech technical team

**Written for:** Logistics companies and freight forwarders, Warehouse and despatch managers, Exporters of palletised and drummed goods

## Short answer

A dunnage air bag is an inflatable bag placed in the gap between pallets, or between the load and the container wall, then inflated so it fills the void and locks the load in place. It stops cargo sliding, tipping and knocking during transport. The bag must be sized to the actual gap — an undersized bag does nothing and an oversized one can burst.

## Key takeaways

- Most transit damage inside a locked, undamaged container is load movement, not mishandling of the container.
- A dunnage bag fills a void so the load acts as one block against braking, cornering and the sea.
- Size the bag to the gap width and the face it must support; one general size fits nothing well.
- Inflate only to the pressure the maker states, and never place a bag against the container doors.
- Dunnage bags complement blocking, bracing and lashing; they do not replace them for heavy loads.

## Why cargo arrives broken in an undamaged container

A container can be lifted, stacked, sailed and trucked without a scratch, arrive with its seal intact — and still be full of broken goods. The damage happened inside: pallets slid on braking, drums tipped in a turn, cartons were crushed when a load shifted in heavy seas.

Any empty space inside a container, truck or wagon is space the load can move into, and movement builds momentum. The answer is to remove the space.

## What a dunnage bag does

A [dunnage air bag](https://www.gipacktech.com/products/pallet-covers-and-pallet-wraps/dunnage-air-bag) is an inflatable bag placed in a gap — between rows of pallets, between drums, or between the load and a side wall — and then inflated. It expands to fill the void and presses the load units together, so they behave as one block that cannot slide or tip.

Its construction is an outer of multi-ply paper or polyethylene for strength and puncture resistance, around a polyethylene inner bladder that holds the air.

## Sizing: one size fits nothing

The right bag size for the gap is what makes a dunnage bag work.

- **Too small:** the bag inflates fully and still does not fill the gap. The load keeps moving.
- **Too large:** the bag cannot inflate to its designed shape in the gap, is over-stressed and can burst — or it is over-inflated to compensate.

Measure three things:

1. The **width of the gap** to be filled
2. The **height** of the load face the bag presses against
3. The **length** of that face

The bag is sized so that, inflated, it fills the gap and covers enough of the load face to spread the pressure. GI PackTech sizes against the actual load plan rather than selling one general size — send the plan and photographs of a loaded container.

## Placing and inflating

| Do | Do not |
| --- | --- |
| Place bags between load units, at mid-height of the load face | Place a bag against the container doors |
| Make sure both faces are flat and free of sharp edges | Put a bag against nails, strapping buckles or sharp corners |
| Inflate to the pressure stated by the maker | Over-inflate to make an undersized bag fit |
| Check the load is tight before closing the doors | Rely on bags alone for very heavy units |
| Use a slip sheet or board where the face is uneven | Leave large voids at the door end unblocked |

## Where dunnage bags fit in load securing

Dunnage bags are one part of securing a load. Heavy machinery, steel and large single items still need **blocking, bracing and lashing** to fixed points. Dunnage bags fill the gaps between units so the whole load is tight. International guidance on packing cargo transport units — the IMO/ILO/UNECE Code of Practice for Packing of Cargo Transport Units (the CTU Code) — treats void filling and load securing as part of the same job.

## Keep the units themselves stable

A dunnage bag holds pallets against each other, but each pallet still has to hold together. A [pallet shrink hood](https://www.gipacktech.com/products/pallet-covers-and-pallet-wraps/pallet-shrink-hood) turns a stack into a single solid block, and an [LDPE pallet hood](https://www.gipacktech.com/products/pallet-covers-and-pallet-wraps/ldpe-pallet-cover-and-hood) closes the top face that stretch wrap leaves open — see [pallet covers vs stretch wrap vs shrink hoods](https://www.gipacktech.com/blog/pallet-covers-vs-stretch-wrap-vs-shrink-hoods).

## Applications

Container shipments, truck loads, rail freight — palletised goods, drums, cartons and bagged product. Anywhere a gap is left between load units because the load does not exactly match the box.

Send the load plan; the bag sizes are worked out for your gaps.

## Frequently asked questions

**What is a dunnage air bag used for?**

It fills empty space inside a container, truck or rail wagon so the load cannot move. Placed between pallets, drums or cartons — or between the load and a wall — and inflated, it presses the load units against each other so they behave as one block, which stops sliding, tipping and impact damage during braking, cornering and rough seas.

**How do I choose the right dunnage bag size?**

Measure the width of the gap to be filled and the height and length of the load face the bag will press against. The bag should be sized so that, inflated, it fills that gap fully and covers enough of the face to spread the pressure. An undersized bag cannot fill the void; an oversized one is over-stretched and can burst. Send a load plan to have it sized.

**Can dunnage bags be placed against the container doors?**

No. A dunnage bag should not be used against the doors at the end of the load, because the doors are not designed to restrain cargo pressure and the bag can push them or fall out when they are opened. The door-end gap is closed with blocking or bracing instead, and dunnage bags are used between load units.

## Products mentioned

- [Dunnage Air Bag for Container and Truck Loads](https://www.gipacktech.com/products/pallet-covers-and-pallet-wraps/dunnage-air-bag) — Movement in transit is the largest cause of damage inside a sealed container
- [Pallet Shrink Hood](https://www.gipacktech.com/products/pallet-covers-and-pallet-wraps/pallet-shrink-hood) — Makes the stack behave as one block
- [LDPE Pallet Cover and Pallet Hood](https://www.gipacktech.com/products/pallet-covers-and-pallet-wraps/ldpe-pallet-cover-and-hood) — One piece, no joins, made to your stack height
- [Container Liner for Dry Bulk — PP Woven and PE Film](https://www.gipacktech.com/products/container-liners-and-sacks/container-liner-pp-woven-and-pe-film) — Turns a standard shipping container into a sealed bulk vessel

## Related guides

- [Pallet Covers vs Stretch Wrap vs Shrink Hoods: Which Protects a Pallet Best?](https://www.gipacktech.com/blog/pallet-covers-vs-stretch-wrap-vs-shrink-hoods)
- [Container Rain and Cargo Sweat: Protecting Goods from Moisture on a Sea Voyage](https://www.gipacktech.com/blog/container-rain-and-cargo-sweat)
- [Container Liners for Dry Bulk: Laminated, Unlaminated or PE Film?](https://www.gipacktech.com/blog/container-liners-for-dry-bulk)

---

## How to enquire

Everything is made to order against the buyer's specification, so there is no price list. Send the product data sheet, the container internal dimensions or the machine drawing, and the approximate annual quantity. The reply is a specification, a quotation and a sample for trial fitment.

- Specify a requirement: https://www.gipacktech.com/specify
- Contact: Mr. Alpesh Desai, Chief Executive Officer
- Email: alpesh@gibags.net
- Phone: +91 98210 18387
- WhatsApp: https://wa.me/919821018387
- Manufacturing plant: Plot No. 608, New GIDC, Gundlav, Valsad, Gujarat 396035, India
- Office: Rajneel Bunglow, North Avenue Corner, Linking Road, Santacruz (West), Mumbai 400054, India
